Submissions from 2019
Energy Performance Certification: Misassessment Due to Assuming Default Heat Losses, Ciara Ahern and Brian Norton
Thermal Refurbishment Status of the Irish Housing Stock, Ciara Ahern and Brian Norton
Engineering Education through Problem Based Learning: a case study of teaching Mechanical Engineering Design in TU Dublin, Kevin Delaney and Ger Nagle
Submissions from 2018
Validating a Reduced-Order Model for Synthetic Jet Actuators Using CFD and Experimental Data, Tim Persoons, Rick Cressall, and Aliimohammadi Sajad
Submissions from 2017
An Enhanced Spring-Particle Model for Red Blood Cell Structural Mechanics: Application to the Stomatocyte–Discocyte– Echinocyte Transformation, Mingzhu Chen and Fergal Boyle
Precise Flow-Control Using Photo-Actuated Hydrogel Valves and Pid-controlled LED Actuation, Colm Delaney, Simon Coleman, Jeff Whyte, Nigel Kent, and Dermot Diamond
The Evaluation of the Effect of Strain Limits on the Physical Properties of Magnetorheological Elastomers Subjected to Uniaxial and Biaxial Cyclic Testing., Dave Gorman, Niall Murphy, Ray Ekins, and Stephen Jerrams
3D Printing Aids Acetabular Reconstruction in Complex Revision Hip Arthroplasty, Andrew J. Hughes, Cathal DeBuitleir, Philip Soden, Brian O'Donnchada, Anthony Tansey, Ali Abdulkarim, Colm McMahon, and Conor J. Hurson
A Mathematical Analysis of Drug Dissolution in the USP Flow Through Apparatus, David McDonnell, Deirdre M. D'Arcy, Lawrence J. Crane, and Brendan Redmond
Submissions from 2016
Solar Thermal Systems: Towards a Systematic Characterization of Building Integration, Laura Aelenei, Mervyn Smyth, Werner Platzer, Brian Norton, David Kennedy, Soteris Kalogirou, and Christoph Maurer
Towards 3D in vitro models for the study of cardiovascular tissues and disease, Claire M. Brougham, Alan J. Ryan, Carolina D. Garciarena, Steve W. Kerrigan, and Fergal J. O'Brien
Submissions from 2015
Sequential Structural and Fluid Dynamics Analysis of Balloon-Expandable Coronary Stents: A Multivariable Statistical Analysis, David Martin and Fergal Boyle
Submissions from 2014
Investigation of Membrane Mechanics using Spring Networks: Application to Red-blood-cell Modelling, Mingzhu Chen and Fergal Boyle
Process Simulation of Biomass Gasification Integrated With a Solid Oxide Fuel Cell Stack, Wayne Doherty, Anthony Reynolds, and David Kennedy
Computational Fluid Dynamics Analysis of Balloon-Expandable Coronary Stents: Influence of Stent and Vessel Deformation, David Martin, Eoin Murphy, and Fergal Boyle
A Quantitative Analysis of the Impact of Wind Energy Penetration on Electricity Prices in Ireland, Micheal O'Flaherty, Niall Riordan, Noel O'Neill, and Ciara Ahern
Ireland's Tidal Energy Resource: an Assessment of a Site in the Bulls Mouth and the Shannon Estuary Using Measured Data, Fergal O'Rourke, Fergal Boyle, and Anthony Reynolds
Submissions from 2013
Issues Associated With Planning, Implementing, Managing and Operating Public Transport Projects in Ireland., Roisin Byrne-Murray, Mike Murphy, and Aoife Ahern
Improving Tribological Properties of Cast Al-Si Alloys Through Application of Wear-Resistant Thermal Spray Coatings, David Culliton, Tony Betts, Sandra Carvalho, and David Kennedy
Impact of Intermetallic Precipitates on the Tribological and/or Corrosion Performance of Cast Aluminium Alloys: a Short Review, David Culliton, Tony Betts, and David Kennedy
Scheduling of Intelligent and Autonomous Vehicles under Pairing/unpairing Collaboration Strategy in Container Terminals, Shahin Gelareh, Rochdi Merzouk, Kay McGinley, and Roisin Byrne-Murray
Finite Element Analysis of Balloon-Expandable Coronary Stent Deployment: Influence of Angioplasty Balloon Configuration, David Martin and Fergal Boyle
Submissions from 2012
A Generalized Version of an Ivantsov-Based Dendrite Growth Model Incorporating a Facility for Solute Measurement Ahead of the Tip, Shaun McFadden and David Browne
A Front Tracking Model of the MAXUS-8 Microgravity Solidification Experiment on a Ti-45.5at.%Al-8at.%Nb Alloy, Robin Mooney and S. McFadden
Submissions from 2011
Domestic Application of Micro Wind Turbines in Ireland: Investigation of Their Economic Viability, Zhe Li, Fergal Boyle, and Anthony Reynolds
Some Experiences, Thoughts, Ideas and Open Questions Relating to Applied Thermodynamics, Jim McGovern
Technical Note: Friction Factor Diagrams for Pipe Flow, Jim McGovern
Rational Efficiency of a Heat Exchanger, Jim McGovern and Brian P. Smyth
Submissions from 2010
Computer Simulation of a Biomass Gasification-solid Oxide Fuel Cell Power System using Aspen Plus, Wayne Doherty, Anthony Reynolds, and David Kennedy
Simulation of a Tubular Solid Oxide Fuel Cell Stack Operating on Biomass Syngas Using Aspen Plus, Wayne Doherty, Anthony Reynolds, and David Kennedy
Rainwater Harvesting and Greywater Treatment Systems for Domestic Application in Ireland, Zhe Li, Fergal Boyle, and Anthony Reynolds
Computational Structural Modelling of Coronary Stent Deployment: A Review, David Martin and Fergal Boyle
Drug-Eluting Stents for Coronary Artery Disease: A Review, David Martin and Fergal Boyle
A Suggested Building Block Geometry Without Continuous Radial Joints of Possible Relevance for Particle Detectors, Jim McGovern
A full-range, multi-variable, CFD-based methodology to identify abnormal near-wall hemodynamics in a stented coronary artery, Jonathan Murphy and Fergal Boyle
A Numerical Methodology to Fully Elucidate the Altered Wall Shear Stress in a Stented Coronary Artery, Jonathan Murphy and Fergal Boyle
Predicting Neointimal Hyperplasia in Stented Arteries Using Time-Dependant Computational Fluid Dynamics: A Review, Jonathan Murphy and Fergal Boyle
Marine Current Energy Devices: Current Status and Possible Future Applications in Ireland, Fergal O'Rourke, Fergal Boyle, and Anthony Reynolds
Tidal Current Energy Resource Assessment in Ireland: Current Status and Future Update, Fergal O'Rourke, Fergal Boyle, and Anthony Reynolds
Tidal Energy Update 2009, Fergal O'Rourke, Fergal Boyle, and Anthony Reynolds
Submissions from 2009
Simulation of a Tubular Solid Oxide Fuel Cell Stack Operating on Biomass Syn-gas using Aspen Plus, Wayne Doherty, Anthony Reynolds, and David Kennedy
The Effect of Air Preheating in a Biomass CFB Gasifier using ASPEN Plus Simulation, Wayne Doherty, Anthony Reynolds, and David Kennedy
Renewable Energy Resources and Technologies Applicable to Ireland, Fergal O'Rourke, Fergal Boyle, and Anthony Reynolds
Submissions from 2008
Robots Assist in Treatment of Stroke Patients, Philip Deering, David Kennedy, and James Conlon
Some Rather Mechanical Reflections on Symmetry: in Art, Science, Engineering, Mathematics, etc., Jim McGovern
Submissions from 2007
Thermal Testing of Building Insulation Materials, Eoghan Frawley and David Kennedy
Treating Water Contamination using Ultraviolet Radiation to Control Cryptosporidium and E.Coli, Michael O'Hehir, David Kennedy, and Thomas Dunphy
Submissions from 2005
Current and Future Applications of Surface Engineering, David Kennedy, Yueqiang Xue, and Emilia Mihaylova
Micro Shot Blasting of Machine Tools for Improving Surface Finish and Reducing Cutting Forces in Manufacturing, James Vahey and David Kennedy
Submissions from 2003
Air Intake Cooling Motor Vehicle Performance Enhancement, James Brunton, David Kennedy, and John D. Kelleher
Engineering is Fun - let's Celebrate, Jim McGovern
Turning an Articulated Truck on a Spreadsheet, Jim McGovern
Submissions from 1995
CHP and Energy Conservation, Jim McGovern
Submissions from 1990
Exergy Analysis - A Different Perspective on Energy Part 2: Rational Efficiency and Some Examples of Energy, Jim McGovern
Submissions from 1983
A Heat Pump Assisted Shower, Jim McGovern