Investigation of Macrobending Losses of Standard Single Mode Fiber with Small Bend Radii

Authors

Pengfei Wang, Technological University DublinFollow
Qiang Wu, Technological University DublinFollow
Gerald Farrell, Technological University DublinFollow
Ginu Rajan, Technological University DublinFollow
Thomas Freir, Technological University DublinFollow
John Cassidy, Technological University DublinFollow

Document Type

Article

Rights

Available under a Creative Commons Attribution Non-Commercial Share Alike 4.0 International Licence

Disciplines

2. ENGINEERING AND TECHNOLOGY

Publication Details

Microwave and Optical Technology Letters, Vol. 49, Issue 9, September 2007, pp. 2133-213 DOI: 10.1002/mop.22671

Abstract

An investigation of macrobending loss characteristics of a standard singlemode fiber (SMF28) for small bend radii is presented theoretically and experimentally, which includes the bend loss of the SMF28 with coating layers and the bare SMF28 after stripping the coating layers and chemical etching of partial cladding. The significant influence of reflection occurring at the interface between the cladding and coating layer or the cladding layer and air on the bend loss is investigated theoretically and experimentally.

DOI

https://doi.org/10.1002/mop.22671

Recommended Citation

Wang, P. et al. (2007) “Investigation of macrobending losses of standard single mode fiber with small bend radii”, Microwave and Optical Technology Letters, Vol. 49, Issue 9, September 2007, pp. 2133-213. doi;10.1002/mop.22671