ORCID

Abstract

UV-induced degradation of photopolymerisable hybrid sol-gel layers sensitised with Omnirad 784 is investigated for holographic optical element applications. Volume phase transmission gratings were recorded in layers prepared under different curing conditions and with polyurethane diol as a plasticising additive. UV exposure was found to induce layer cracking, with layer thickness and curing temperature strongly affecting the degradation time. Lower curing temperatures and plasticiser incorporation extend the lifetime of layers from minutes to up to 2 years following exposure to a UV dose of 28.1 J/cm2, while preserving holographic recording capability. Nanoindentation measurements suggest that UV exposure promotes further network stiffening, consistent with additional post-exposure polymerisation and the associated build-up of internal stress leading to cracking. Results identify layer thickness, curing temperature and plasticiser incorporation as the key processing parameters governing UV-induced degradation, and provide practical strategies for improving the environmental stability of such holographic materials.

Publication Date

2026-08-01

Publication Title

Optical Materials Express

Volume

16

Issue

8

First Page

2653

Last Page

2667

Deposit Date

2026-11-10

Funding

Taighde Éireann - Research Ireland (21/FFP-A/9211, 22/PATH-S/10837); Irish Research eLibrary . The authors also acknowledge Enterprise Ireland for funding the Nanoindentator used. Open access funding provided by Irish Research eLibrary.

Creative Commons License

Creative Commons Attribution 4.0 International License
This work is licensed under a Creative Commons Attribution 4.0 International License.


Share

COinS